ASICO employs the highest level of artistic craftsmanship alongside hot press technology and bonded cores to produce the most elegant, high-performing doors. With a rich experience of exporting to many markets, ASICO has learned a lot about the market in different countries. Hence, our team has focused so long on designing and fabricating the most satisfied different steel doors to achieve your decorative or purchasing expectations in a wide range of width, height and designs.
ASICO’s door features:
ASICO Steel Frame product is constructed with regard to joint designs and welding techniques or Knock down 3pcs frames (KD structure including strike jamb, hinge jamb and head). Prior to shipment mark frame product with an identification number as shown on approved submittal drawings.
More details for ASICO metal frames:
Frame steel thickness: 18 gauge (1.2mm), 16 gauge (1.5mm), 14 Gauge (2.0mm)
Throat depth available: 4 3/4” - 10 1/4”
Standard height of stops shall be 0.625 in. (15.8 mm)
Factory applied baked-on rust inhibiting primer or Prefinished.
Cut ready opening is prepared for single stud, door silencers, three (3) per strike jamb for single door openings, two (2) per head for pairs, except on gasketed or weather stripped frame product. Silencers shall be supplied and installed by others.
ASICO Frame product is mortised, reinforced, drilled and tapped at the factory for templated
hardware or in accordance with the approved hardware schedule and templates provided
by the hardware supplier.
Hardware reinforcing ready for Full mortised hinges and pivots, Strikes, Flush bolts, closer,
hold open arms, and other surface applied hardware
Fire rated unique label 20 minutes, 1 hour, 1.5 hour, 2 hours up to 3 hours.
Packages & Delivery
ASICO pays more attention to protecting the interests of clients. Do what the clients wanted and expected. Any door before delivery will be packed well and carefully. Wrap the door with elastic plastic film, and use rigid box corner around the door four edges, then fix on the pallet by belt and plastic film. The second reinforcement will be bonded on the surround and bottom.
Processing Line